Lumitex Specification 3

Note: The actual life of any LED is highly dependent on acutal operating conditions, particularly drive current, ambient temperature, ambient humidity, voltage spikes and ESD.

Lumitex Part Number	003385	003387	003384
Color	Green	White	Blue
Wavelength (approx center)	520nm	430-700nm	470nm
Size	5mm, T 1-3/4	5mm, T 1-3/4	5mm, T 1-3/4
Die	InGaN	InGaN	InGaN
Directivity	15 deg	20 deg	15 deg
DC fwd voltage Vf (volts)
Typical @20mA	3.5	3.6	3.6
Max @20mA	4.0	4.0	4.0
DC reverse current (microamps) @ 5volts	50	50	50
Optical Power (mW)	4	NA	6
Luminous Intensity (cd)	10	3	5.6
Life (20 mA, 25 deg C in lab test)	100,000 hours	60,000 hours	60,000 hours
Chromaticity Coordinates
Typical x	0.170	0.310	0.130
Typical y	0.700	0.320	0.075
Max Fwd Current (mA)	30	30	30
Pulse Fwd Current (mA)	100	100	100
Max DC reverse voltage (v)	5	5	5
Power Dissipation (mW)	120	120	120
Operating Temp (deg C)	-40 to +85	-40 to +85	-40 to +85
Storage Temp (deg C)	-40 to +100	-40 to +100	-40 to +100

Notes for 003384 Blue, 003385 Green, and 003387 White LED's

Ratings at 25 deg C, 20mA.

The LED light output is strong enough to injure human eyes. Precautions must be taken to prevent looking directly at the LED with unaided eyes for more than a few seconds.

Static Electricity and surge damage the LED's. It is recommended to use a wrist band or anti-electrostatic glove when handling the LED's.

When forming leads, the leads should be bent at a point at least 3mm from the base of the epoxy bulb.

Solder the LED's no closer than 3mm from the base of the epoxy bulb. Maximum soldering iron temperature is 300 deg C for 3 seconds. Maximum solder dipping temperature is 260 deg C for 5 seconds.

The products described are intended to be used for general electronic equipment (such as office equipment, communications equipment, measurement instruments and household applicances). Consult our sales staff in advance for information on the applications in which exceptional quality and reliability are required, particulary when the failure or malfunction of the products may directly jeopardize life or health (such as for airplanes, aerospace, automobiles, traffic control equipment, life support systems and safety devices.

Life data is based on 20 mA current in a laboratory setting. Actual life will depend on actual operating conditions.

The specifications of the product may be modified for improvement without prior notice.

Lumitex Part Number	003383	003018
Color	Amber	Red
Wavelength (approx center)	590 nm	660 nm
Size	5mm, T 1-3/4	5mm, T 1-3/4
Die	AlInGaP	GaAlAs
Directivity	6	15 deg
DC fwd voltage Vf (volts)
Typical @20mA	2.02	1.75
Max @20mA	2.4	2.2
DC reverse current (microamps) @ 5volts	100	100
Luminous Intensity (cd)	9.3	1.25
Life (20 mA, 25 deg C in lab test)	100,000 hours	100,000 hours
Max Fwd Current (mA)	50	50
Max DC reverse voltage (v)	5	4
Power Dissipation (mW)		125
Operating Temp (deg C)	-40 to +100	-20 to +85
Storage Temp (deg C)	-40 to +120	-30 to +100

Notes for 003018 Red LED:

Specifications at 25 deg C, 20mA.

Maximum soldering temperature is 260 deg C for 3 seconds, solder up to 2 mm from the body of the device.

The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming.

Notes for 003383 Amber LED:

Max soldering temperature is 260 deg C for 5 seconds, 0.060 inches (1.59mm) below seating plane.

Home Page, Applications, Technologies, Specifications, Info Request,
About Lumitex, Poly-Optical, Site Map, Email Lumitex

Lumitex, Inc
8443 Dow Circle
Strongsville, Ohio 44136 USA
Toll Free: 800-969-5483
Phone: 440-243-8401
Fax: 440-243-8402
email: info@lumitex.com

Contact our sales department at info@lumitex.com or call at 440-243-8401